DIY Looping Delay Kit [LD Kit]

Do-It-Yourself Kit for the Looping Delay module.

Crystal-clear clock-synced delay for looping up to 90 seconds, echoes, sound-on-sound, Karplus-Strong synthesis, and more.


$175.00


DIY Kit:

  • Easy assembly: all through-hole components. No SMT or wiring
  • Perfect kit for beginners and experts alike
  • 48kHz, 24-bit low-noise audio: same hi-fidelity as other 4ms modules
  • DSP chips and processor are pre-soldered onto a separate plug-in board

Features

  • Loop or echo time is synchronized to a clock
  • 87 seconds of delay/loop time maximum
  • 48kHz/24-bit sampling rate, loop recorded at 16-bit (24-bit optional)
  • Extremely quiet, low noise and low jitter design
  • Tap tempo button and clock Ping input set the basis for one "beat"
  • Delay/loop time set as a number of musical beats (or fractions of beats) using the Time knob, switch, and CV jack
  • Sample-accurate clock output for perfect synchronization
  • Loop clock output
  • Time switches change range of Time knob from 1/8th notes up to 32 bars
  • Digital feedback, up to 110%
  • Delay Feed control, independent of dry/wet signal mix
  • Infinite Hold mode disables recording input and fixes regeneration at exactly 100%
  • Reverse mode plays memory contents backwards
  • With an infinite loop locked, knobs or CV can "window" around memory, by shifting the loop
  • Trigger inputs for toggling Infinite Hold and Reverse
  • Send and Return for applying effects to feedback with external modules
  • CV jacks to control Time, Level, Feedback and Dry/Wet Mix
  • 16HP Eurorack module

Included with the DIY Looping Delay Kit:

  • Main PCB
  • Faceplate
  • All components required for assembly (resistors, capacitors, diodes, ICs, sockets, headers, jacks, buttons, potentiometers, knobs)
  • Pre-programmed and pre-soldered "DSP Brain-Board"
  • SD adaptor
  • 16-to-16 pin power cable
  • M3 screws
Required for assembly:
  • Soldering iron
  • Solder
  • Snips

Electrical and Mechanical Specifications:
  • Module Size:
    • 16 HP Eurorack format module
    • 16-pin Eurorack power header
    • 1.3" (33mm) maximum depth with power cable
  • Power consumption:
    • +12V: 110mA
    • -12V: 45mA
    • +5V rail: not used
    • Connect red stripe of power cable towards the bottom of the module, which is marked with a white stripe and the words -12V and POWER

 


−