| Eurorack Power Distro Board Shrouded [Full Kit] |
Build your own Eurorack Power Distro Board, with the Euro Power Distro kit (with shrouded headers only).
The do-it-yourself kit includes all the parts necessary to build a fully-featured Euro Power Distro Board. This is an intermediate-level kit, you need some prior experience, and have basic hand tools (flush snips, needle-nose pliers, small screw driver).
Not directly compatible with Row Power modules
Kit for the 4ms Euro Power Distribution Board. Includes all components and PCB. Requires soldering.
Fuses included will be 1.1A per rail
Electrical and Mechanical Specifications:
Electrical and Mechanical Specifications:
- Built-in +5V:
- Generates +5V from the +12V rail
- External 5V supply capabilities
- Fuses:
- Resettable PTC fuses instantly blow when there's a problem
- Separately fused rails to protect each output
- Doepfer power connectors:
- Twenty-one (21) standard 16-pin Eurorack power headers.
- Keyed headers to prevent plugging in backwards.
- Filter capacitors:
- Reduce module-to-modile noise and power line hum.
- LED's:
- indicate power on each rail (+12V, +5V, -12V)
- Double set of blade tabs:
- Easy to daisy chain multiple boards.
- Connects with standard 0.250" blade ("spade") connectors.
- One set of vertical and one set of right angle tabs.
- Sizing
- Mounting holes:
- 0.105" holes, fits 4/40 or M2.5 screws (M3 screws will "cut" threads)
- Cut to Length:
- Total langth :18.95" (for 104HP case)
- Can be cut down to git in any size case
- Cut mark at 14.4" for an 84HP case
