RCD Breakout (RCDBO)

The RCD Breakout adds features to the Rotating Clock Divider module. Six switches allow you to set the maximum Divide-by amount, Gate or Trigger mode, Counting mode, Spread mode, and Auto-Reset. The RCD Breakout requires the RCD to function, and does not use any extra power.


$95.00 


Features
  • Gate Counting: Down/Up
  • Gate/Trigger mode
  • Divide range up to Divide-by-64
  • Spread mode: Spread mode causes the output to "spread" evenly amongst the entire max division range (see manual).
  • Auto-reset: 16/off

Module size:
The RCD is 4HP and 48mm (1.85")

Power consumption:

  • +12V rail: __mA
  • +5V rail: not used
  • -12V rail: not used

User Manuals: DIY Panel Templates: Latest Firmware code:
  • How to Update your own RCD by yourself: Download the hex file below. Then follow these instructions: Updating Firmware on AVR chips
  • Version 1.1 (2012 April 24) for PCB 1.0.2, 1.0.3, and 1.0.4: hex file (adds Spread mode)
  • Old Version 1.0.2 for PCB 1.0.1 and up: hex file
  • Old Version 1.0.2 for PCB 1.0: hex file
  • 4ms RCD github: Always the latest version, as well as other clocker verisons (Tracking Gate Sequencer, DinSync SCM, etc...): 4ms github
If you don't want to buy the AVR ISP mkII and update your RCD yourself, you can purchase one from 4ms directly here



4ms Rotating Clock Divider Test by ibdk


4ms Rotating Clock Divider Only Sequence by ibdk