0
Eurorack Power Distro Board Shrouded [Full Kit]

Build your own Eurorack Power Distro Board, with the Euro Power Distro kit (with shrouded headers only).

The do-it-yourself kit includes all the parts necessary to build a fully-featured Euro Power Distro Board. This is an intermediate-level kit, you need some prior experience, and have basic hand tools (flush snips, needle-nose pliers, small screw driver).

Not directly compatible with Row Power modules


$45.00


Kit for the 4ms Euro Power Distribution Board. Includes all components and PCB. Requires soldering. Fuses included will be 1.1A per rail

Electrical and Mechanical Specifications:
  • Built-in +5V:
    • Generates +5V from the +12V rail
    • External 5V supply capabilities
  • Fuses:
    • Resettable PTC fuses instantly blow when there's a problem
    • Separately fused rails to protect each output
  • Doepfer power connectors:
    • Twenty-one (21) standard 16-pin Eurorack power headers.
    • Keyed headers to prevent plugging in backwards.
  • Filter capacitors:
    • Reduce module-to-modile noise and power line hum.
  • LED's:
    • indicate power on each rail (+12V, +5V, -12V)
    • Double set of blade tabs:
  • Easy to daisy chain multiple boards.
    • Connects with standard 0.250" blade ("spade") connectors.
    • One set of vertical and one set of right angle tabs.
  • Sizing
    • Mounting holes:
      • 0.105" holes, fits 4/40 or M2.5 screws (M3 screws will "cut" threads)
    • Cut to Length:
      • Total langth :18.95" (for 104HP case)
      • Can be cut down to git in any size case
      • Cut mark at 14.4" for an 84HP case

 


−